Hard Drive Error!

Have you tried to use CHKDSK ?

Have you tried to use CHKDSK ?

Yeah, thats what i meant by disk repair, sorry that wasn’t clear

Maybe try this article – http://www.techsupportforum.com/forums/ … 98827.html

i’m sorry for you….

i don’t have any ideas about this but it just wanted to wish you good luck ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/wink@2x.png 2x” width=”20″ height=”20″>

Maybe try this article – http://www.techsupportforum.com/forums/ … 98827.html

Thanks for the link cole ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/biggrin@2x.png 2x” width=”20″ height=”20″>

I’ll try it tomorrow

i’m sorry for you….

i don’t have any ideas about this but it just wanted to wish you good luck ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/wink@2x.png 2x” width=”20″ height=”20″>

Thanks nathan 😎

Re-install windows like me illy:

I had that problem with my old hard disk, and I needed to buy a new one…

And yes, I used CHKDSK /F but it didn’t work to me ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/sad@2x.png 2x” width=”20″ height=”20″>

Re-install windows like me illy:

I could but i want to try and avoid it, As backing up will take forever ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/smile@2x.png 2x” width=”20″ height=”20″> but will still keep it in mind thx.

I had that problem with my old hard disk, and I needed to buy a new one…

And yes, I used CHKDSK /F but it didn’t work to me ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/sad@2x.png 2x” width=”20″ height=”20″>

I hope not, I have lots of stuff to back up and i don’t want to do that lol

Well there can be that your pc has been infected and the virus is trying to render your hard drive useless another thing can be that some of your hard drive sectors failed at some point and if that’s the case you will need to new hard drive as sectors can’t be repaired. Thing I suggest now is backup really important files and download HDtune and do a error scan then show me the results. Lastly you can try doing System Restore to roll back to old restore point and see if the problem wasn’t there at that time. In the future you could buy exact size hardrive and clone it so if something goes wrong with old hardrive you can just use the clone one for myself I have 3 1tb hard drives 2 are for storage and 1 is for cloning so if my hardrive was to fail I would not have to worry of loosing 800GB of data ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/wink@2x.png 2x” width=”20″ height=”20″> and before anyone tells you to defrag you hard drive DO NOT DO IT if sectors failed defraging will render it useless.

Ok thanks for the tips, I have downloaded hdtune and I did a quick scan, all green. I’m currently doing a long scan. Thanks for the link. After, i will do virus scans ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/smile@2x.png 2x” width=”20″ height=”20″>

??:

Generaly, unless your could ear some grumpy noises for a while on this hdd, and a big ‘clack’, just before the error, your trouble is not that bad.

This could come from several places.

One thing to do is to avoid writing on it for now ( as this could come from the Mft (‘file table’ a sort of ‘database’ keeping which file is in which cluster .. and info of the file format) and if you do you might corrupt even more up to the loss of all data.

Now it could simply be a detection error (in case of usb hdd) or simply bad cluster(s)

What you have to say first is what king of drive it is, SDD, SATA, IDE , internal or external ?

is it the hdd where your Os seats (the boot one or not )

then describe the context of when the error occurs. (is it : after any recent driver install, if it happens on windows boot or after a while, …)

tell your Os and which one if win7 is it pro oem … ?

Did you do a scandisk to check for bad sectors (in this case they will be marked as bad you’ll loose two thre files and everything will be fine after (unless a system file is spot on on it, which will require a re install or repair)

Is it detected properly by windows or not , good format ( fat ntfs ..) good size ?

Well then with the info it ‘ll be easier to spot your trouble ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/wink@2x.png 2x” width=”20″ height=”20″>

It is a SATA HD

Windows 7 is on this HD yes.

It happens when I boot the PC and the error message re-appears every half hour or so.

Its windows 7 home edition.

Yes, I scanned it for bad sectors and its all green, nothing wrong.

It picks it up as 500GB (Correct) and NTFS ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/smile@2x.png 2x” width=”20″ height=”20″>

hello, sorry i cant read all the post. so please be kind with me.

From reading the 1st post, it seems the HDD is failing.

If the HDD still working (still able to go to windows)

– run SMART test and post the result here. you can try using whatever software, example is http://www.almico.com/sfdownload.php SPEEDFAN (go to the SMART Tab)

post the SMART screenshot, and also i ask the “Perform in depth online analysis”

Basically, i suspect you HDD have STC or CRC or Wire error that way above threshold.

or just try unplug your SATA data and power cable from HDD. And use another pair.

If no problem, then your old pair cable is broken or not plugged securely.

sorry the bad english

EDIT:

i forgot one more important thing. Sometime its the PowerSupply thats failing. You can try it by unpluggin any other HDD, any ODD, use 1 stick of RAM, remove Dedicated GPU and use integrated GPU (if available). Or just borrow other friend PSU ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/smile@2x.png 2x” width=”20″ height=”20″>

hello, sorry i cant read all the post. so please be kind with me. 

From reading the 1st post, it seems the HDD is failing.

 

If the HDD still working (still able to go to windows)

– run SMART test and post the result here. you can try using whatever software, example is http://www.almico.com/sfdownload.php SPEEDFAN (go to the SMART Tab)

post the SMART screenshot, and also i ask the “Perform in depth online analysis”

 

Basically, i suspect you HDD have STC or CRC or Wire error that way above threshold.

 

 

or just try unplug your SATA data and power cable from HDD. And use another pair.

If no problem, then your old pair cable is broken or not plugged securely.

 

sorry the bad english

 

EDIT:

i forgot one more important thing. Sometime its the PowerSupply thats failing. You can try it by unpluggin any other HDD, any ODD, use 1 stick of RAM, remove Dedicated GPU and use integrated GPU (if available). Or just borrow other friend PSU ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/smile@2x.png 2x” width=”20″ height=”20″>

Thank you ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/smile@2x.png 2x” width=”20″ height=”20″> yes I will try these. I have 2 other PC’s so i can just swap with those, thanks again

before taking your hdd to a new pc (unless they have exactly same hardware, which will avoid messing your windows)

Do this first:

Because it could simply be a problem with the configuration of the hdd sata.

bios change the settings of the sata interface to “compatibility” mode, after reeboot the pc ,

and see if it show the message again.

watch this first

if it still comes with this error, then as orangpelupa said swap it in an other pc, not as a boot one for a start

or test with another cable or slot

good luck

before taking your hdd to a new pc (unless they have exactly same hardware, which will avoid messing your windows) 

Do this first:

Because it could simply be a problem with the configuration of the hdd sata.

bios change the settings of the sata interface to “compatibility” mode, after reeboot the pc ,

and see if it show the message again.

watch this first

if it still comes with this error, then as orangpelupa said swap it in an other pc, not as a boot one for a start

or test with another cable or slot

 

good luck

Thank you very much ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/smile@2x.png 2x” width=”20″ height=”20″>

Will try all of the last posts later on tonight ” data-emoticon=”” srcset=”/wp-content/uploads/invision_emoticons/smile@2x.png 2x” width=”20″ height=”20″> Thanks to everyone who has posted! 😆